Si tienes problemas de software, este es tu sitio. Construyamos entre todos un lugar mejor, proporcionando experiencias, información de uso y tips. Si tienes alguna pregunta, procura dar información detallada sobre tu sistema.
Si tienes problemas de hardware, tramita la GARANTÍA AQUÍ, ya que nuestros técnicos no suelen revisar el foro por estar trabajando en reparaciones.
La pregunta ha sido cerrada
el 21/10/2025 05:47:44Hello
I've just got the Elemental 14 with a i7-1355U and it's been really good so far!
However, I couldn't help but notice that the BIOS displayed the DRAM at 2667 MHz instead of 3200 MHz as advertised.
I should also say that this is with 2 new SO-DIMM DDR4 RAM-sticks installed that I bought separately since they were the fastest I could find.
I couldn't find anything in the BIOS regarding memory speed.
BIOS version is 1.07.11TGO1
Hello
Yes, this is very strange.
Everywhere I look the model number alludes to it being 3200 MHz RAM.
The stickers on the sticks says "IR-3200S464L16SA/8G"
My receipt from the store even says "PC4-25600" on the specifications.
I could only find a datasheet PDF on Goodrams webbsite, same thing there except the model number was missing the "A".
It has been too long since I bought the sticks so there would be no point in contacting the store.
If there is any solution or suggestion then i'll gladly take what I can get but, to be fair, had I not seen this on the BIOS then I probably wouldn't have noticed.
In the worst case, Goodram has intentionally put the false packaging and information on slower RAM.
If this seems to be a dead end then I understand, I thank you for the help anyway.
Dear Kevin,
the stick you bought with you laptop is indeed a Crucial 8GB stick that runs at 3200MHz,
but the new ones you acquired from Goodram are 2667MHz,
I could not find the manufacturer's website, but in this one it says that dram memory 2667:
"PC4-21300" that is the frequency for 2667mhz
https://www.memorybenchmark.net/ram.php?ram=Wilk+Elektronik+S.A.+IR3200S464L16SA%2F8G+8GB&id=20993
My best regards.
Hello
I reinstalled it and tested, it now displays 3200 MHz both in the BIOS and on dmidecode:
# dmidecode 3.4
Getting SMBIOS data from sysfs.
SMBIOS 3.4 present.
Handle 0x0020, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 64 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0021, DMI type 17, 92 bytes
Memory Device
Array Handle: 0x0020
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: SODIMM
Set: None
Locator: Controller0-ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR4
Type Detail: Synchronous
Speed: 3200 MT/s
Manufacturer: Micron Technology
Serial Number: 4BEC60C9
Asset Tag: 9876543210
Part Number: CT8G4SFRA32A.8FE1
Rank: 1
Configured Memory Speed: 3200 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 1, Hex 0x2C
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 8 GB
Cache Size: None
Logical Size: None
Handle 0x0022, DMI type 17, 92 bytes
Memory Device
Array Handle: 0x0020
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: Controller1-ChannelA-DIMM0
Bank Locator: BANK 0
Type: Unknown
Type Detail: None
# dmidecode 3.4
Getting SMBIOS data from sysfs.
SMBIOS 3.4 present.
Handle 0x0020, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 64 GB
Error Information Handle: Not Provided
Number Of Devices: 2
Handle 0x0021, DMI type 17, 92 bytes
Memory Device
Array Handle: 0x0020
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: SODIMM
Set: None
Locator: Controller0-ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR4
Type Detail: Synchronous
Speed: 2667 MT/s
Manufacturer: Wilk Elektronik S.A.
Serial Number: D1E81010
Asset Tag: 9876543210
Part Number: IR3200S464L16SA/8G
Rank: 1
Configured Memory Speed: 2667 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 8, Hex 0x5D
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 8 GB
Cache Size: None
Logical Size: None
Handle 0x0022, DMI type 17, 92 bytes
Memory Device
Array Handle: 0x0020
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 8 GB
Form Factor: SODIMM
Set: None
Locator: Controller1-ChannelA-DIMM0
Bank Locator: BANK 0
Type: DDR4
Type Detail: Synchronous
Speed: 2667 MT/s
Manufacturer: Wilk Elektronik S.A.
Serial Number: A1271010
Asset Tag: 9876543210
Part Number: IR3200S464L16SA/8G
Rank: 1
Configured Memory Speed: 2667 MT/s
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: 1.2 V
Memory Technology: DRAM
Memory Operating Mode Capability: Volatile memory
Firmware Version: Not Specified
Module Manufacturer ID: Bank 8, Hex 0x5D
Module Product ID: Unknown
Memory Subsystem Controller Manufacturer ID: Unknown
Memory Subsystem Controller Product ID: Unknown
Non-Volatile Size: None
Volatile Size: 8 GB
Cache Size: None
Logical Size: None
Please Leonito,
can you run the following command on your terminal?
sudo dmidecode --type memory
Paste on your next answer the result it returns.
My best regards.
